Technology of temporal-spatial fusion guidance based on laser multiple sub-beams interference
Keywords:
Coherent emission system, Fusion guidance, Multiple sub-beams interference, Semi-active homingAbstract
Advancements in laser decoy techniques have rendered laser semi-active guided weapons using traditional encoding methods unable to fulfill the needs of modern warfare. A fusion guidance system based on multiple sub-beam interference is proposed. The spatial "watermark cipher code" is combined with the temporal coded signal to produce a new temporal-spatial watermarking coded signal. The laser is divided into several equal power sub-beams which can produce an effective spatial watermarking interference pattern due to their coherence. Calculation results show that the interference pattern presents special distribution features of alternating brightness and darkness. The operating range and the identification of the guidance system are enhanced by the watermark encoding mode. When the position offset and angle deviation of the beam splitter, in the multiple sub-beams coherent emission system are less than 0.1λ(λ is the wavelength) and 0.0(θ0 is the beam divergence), respectively, the effect of mechanical vibration on the emission system can be ignored. © 2019, Editorial Board, Journal of Applied Optics. All right reserved.
References
Liu F., Ying J.J., Liu M.M., An analysis on set-forward of laser guide active jamming, Proceedings of SPIE-the International Society for Optical Engineering, (2013)
Cao Z., Technology of filber-optical guidance and its application, Acta Photonica Sinica, 36, b06, pp. 53-55, (2007)
Miao X., Zhao W., Zhang H., Et al., Research of laser encoding method based on time-controlled pulse interval, Infrared and Laser Engineering, 45, 10, pp. 51-58, (2016)
Chen B., Zhao Y., Li X., A new approach to target tracking during infrared image terminal guidance, Acta Photonica Sinica, 38, 11, pp. 3034-3039, (2009)
Ju Y., Ma B., Yao M., Et al., Encoding and jamming technology for laser guidance signal, Electronics Optics & Control, 14, 1, (2007)
Su J., Huang Y., Liu S., Et al., Research on the hardware-in-the-loop simulation technology for the energy characteristics of laser guided weapons, Acta Photonica Sinica, 36, 9, pp. 1722-1725, (2007)
Li H., Gan L., Zhang W., Et al., Simulation precision analysis of line of sight between bomb and target on hardware in the loop system for laser guided weapon countermeasure, Laser & Optoelectronics Progress, 52, 1, pp. 103-111, (2015)
Yang F., Zhang X., He Y., Et al., Fiber laser ranging system based on different pseudorandom code modulation, Chinese Journal of Laser, 41, 6, pp. 270-275, (2014)
Shen S., Chen Q., He W., Et al., Research on performance of random bitstream ranging system based on single photo detection theory, Acta Optica Sinica, 34, 10, pp. 131-138, (2014)
Wu Z., Chen Z., Pu J., Et al., Generation of a new kind partially coherent beam and its coherent properties, Acta Photonica Sinica, 46, 5, pp. 40-43, (2017)
Lian T., Wang S., Cai D., Et al., Coherent emitting of multiple sub-beams for small target detection, Acta Physica Sinca, 63, 3, pp. 136-144, (2014)
Yun J., Gao C., Zhu S., Et al., High-peak-power, single-mode, nanosecond pulsed, all-fiber laser for high resolution 3D imaging LIDAR system, Chinese Optics Letters, 10, 12, pp. 39-41, (2012)
Shen J., Xiong W., Shi H., Et al., Phase detection and drift correction for Doppler asymmetric spatial heterodyne interferometer, Acta Photonica Sinica, 46, 9, pp. 108-114, (2017)
Yang Y., Liu X., Exposure time control of large aperture static imaging spectrometer, Acta Photonica Sinica, 44, 11, pp. 49-54, (2015)
Gao H., Chen J., Xie H., Et al., A new method for building an atomic matter-wave interferometry, Acta Physica Sinca, 51, 8, pp. 1696-1699, (2002)
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Journal of Applied Optics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The CC Attribution-NonCommercial 4.0 License allows sharing and adapting the work, provided the creator is credited and the work is not used commercially. Modifications must be indicated, and derivative works under the same license are allowed.
